and by on, I mean, on the wall! Hehe. We are moving along with the progress of our powder room project, and since we've taken care of the first step, we are ready to add the next layer. In a previous post, we had mentioned a paneling project with a modern twist and that's what we've got in store. So, here's the design concept - a classic crisp white paneling on the lower portion of the powder room walls, but instead of a traditional panel design or a typical bead board design, we have designed a more modern style horizontal plank paneling. You know, how I love a good horizontal design.
As you also know, I'm a huge DIY fan and love the sense of adventure and accomplishment (hopefully) that every DIY project brings. Not to mention that I also have the maybe-a-little-overconfident belief that I can do anything I set my mind to! So, from the beginning, this project was something Logan and I were definitely gonna tackle ourselves. But (yep, here's where the 'but' comes in), I have to be honest and say that I am also a fan of hiring a professional to get a job done, and to get it done right. I've seen too many clients with a "whoops, guess I shoulda called a professional" mistake and, by the time they called me it was too late. So, as a little disclaimer, before you tackle this project, please know that it has some difficult steps, requires some special tools and takes a good amount of time and hard work. However, if you're up for the challenge.. the result is worth it!
But, before we show you the results, lets go back to where it all began!
To get started with this DIY paneling project, we headed to our local home improvement store to pick up some supplies. Fortunately, all we really needed to purchase was the wood, because our already acquired arsenal of DIY supplies will take care of the rest. But, so you can plan accordingly, here's a list of what you'll need.
- paper and pencil (to plan out your design)
- a tape measure
- wood (specific to your panel design)
- a saw (we used a jig saw, but a circular saw would probably be best)
- laser level
- nails, nail gun and compressor
- wood putty or spackle
- sand paper
- drop cloth
- painter's tape
- paint brushes
With all of these supplies on hand, follow these how-to instructions to create your own unique paneling for any space in your home.
DIY Wall Paneling How-to
- Determine Paneling Design. Decide on the look and feel you want and sketch it out. This will help you in the following steps. As you know, we decided on a horizontal wood paneling design. Our design incorporated wood planks of varying widths and depths for added texture. In this step, we determined the plank dimensions that were the most aesthetically pleasing and in what pattern they would look best - see our elevation drawings below. (Side note: I happen to love drafting and using AutoCAD, so don't mind me.. instead you could just as easily use pencil and paper, which I did first anyway).
- Measure and Plan. Determine the measurements and calculations of your paneling design and how it will fit in your space. This will include height, spacing, proportions, size, etc. Therefore, this is also when you'll determine how much material to buy. In this step, we determined the appropriate height of the paneling on the wall for our space, and also took the perimeter measurements of the space to determine how many of each plank size we would need to implement our design. You'll notice that we utilize the wall surface, as part of the panel design, to save on material.
- Cut the Wood. After (and only after) you have measured and checked your measurements, you can start to cut your pieces of wood. I suggest doing this step in combination with the next step - cutting each piece, then hanging it, before moving on to cutting the next. It is a lot less confusing than having 20 pieces of precisely cut wood, but not remembering which piece goes where. Not to mention, sometimes measurements change as you go, even just a tad - your saw blade can eat away about 1/8" of your wood as you cut, so remember to allow for that.
- Hang the Paneling. Again, do this in combination with cutting, as you'll want to double check your measurements between each cut to ensure a perfect fit. Oh and by the way, in our case, this step was easiest when done with two people. One person to hold the laser level (to ensure that the horizontal plank was actually horizontal), while the other person lines up the wood plank on the wall. Then, the first person grabs the nail gun and nails the plank in, while the other person is holding the plank firmly against the wall (careful not to nail any fingers). And, if you get to choose which job is yours - I think the nail gun is the fun job. I love that thing! I do love a power tool every once and awhile. =)
- Putty and Sand. Once the boards are all attached to the wall, and your paneling design looks complete, it's time to add a painted finish. But, like any painted finish, you want to prepare the surface. In this case, this includes puttying the nail gun holes and the seams where any wood planks meet. Once the putty dries (typically about 24 hours) go to town with some sandpaper to create a beautifully smooth finish. This process took us a few days with the drying time and my perfectionism. So, depending on your project this part may take the longest.
- Paint and Enjoy. Lastly, you want to paint the paneling in whatever color you choose. We went with a warm crisp white in a semi-gloss finish. But first, make sure to use painters tape to trim out and protect any edges you do not want painted. In our case, we taped the blue-grey wall so that when we painted the top of the paneling we wouldn't damage the freshly painted wall. Then, we went ahead and painted the entire paneling area with a brush to ensure that every nook and cranny got covered.
So, that's it! Simple, right? Follow this how-to and you can add a personalized architectural feature to any of your spaces.
Below are a few photos of our finished DIY paneling project result. Check it out and let us know what you think!
So there you have it - another step completed in our powder room project. But even with the paneling complete, this space is still a blank canvas, so we will, of course, be adding the next layer in the near future. Check back soon for progress!